ABB OT63F6 Switch-Disconnector

Product Description

ABB OT63F6 Switch-Disconnector Specifications: Product Type : Switch-Disconnector (Non-Fusible Disconnect Switch) Manufacturer : ABB Model : OT63F6 (Product ID: 1SCA105379R1001) Device Application : Isolation, manual switching, and disconnection in low-voltage circuits (e.g., power distribution, motor control centers) Poles Description : 6P (6 poles) Rated Operational Current AC-21A (Ie) : 63 A at 380–415 V 63 A at 500 V 63 A at 690 V Rated Operational Current AC-22A (Ie) : 63 A at 380–415 V 63 A at 500 V 63 A at 690 V Rated Operational Current AC-23A (Ie) : 63 A at 380–415 V 45 A at 500 V 20 A at 690 V Rated Operational Power AC-23A (Pe) : 11 kW at 220–240 V 22 kW at 400–415 V 22 kW at 500 V 15 kW at 690 V Conventional Free-air Thermal Current (Ith) : 63 A at 40 °C Conventional Thermal Current (Ithe) : 63 A (fully enclosed) Rated Operational Voltage : 750 V AC (main circuit) Maximum Operating Voltage UL/CSA : 600 V AC Rated Insulation Voltage (Ui) : 750 V (IEC/EN 60664-1) Rated Impulse Withstand Voltage (Uimp) : 8 kV Rated Conditional Short-Circuit Current (Inc) : 50 kA with 100 A fuse at ≤415 V 100 kA with 100 A fuse at 500 V 50 kA with 80 A fuse at 690 V Rated Short-Circuit Making Capacity (Icm) : 1.4 kA at 690 V Rated Short-time Withstand Current (Icw) : 1.5 kA for 1 s Power Loss : 2.8 W per pole at rated operating conditions Operating Mode : Front operated Handle Type : Knob handle (handle and shaft not included) Mounting Type : Base mounting, DIN-rail mountable Position of Line Terminals : Top In – Bottom Out or Bottom In – Top Out Connection Type : Screw terminals with protected clamp Cable Cross-Section : Flexible with Ferrule: 1 x 1.5–4 mm² Solid: 1 x 1.5–6 mm² Flexible: 1 x 1.5–35 mm² Stranded: 1 x 1.5–35 mm² Wire Stripping Length : 10–12 mm Tightening Torque : 2 N·m (IEC 60947-1); 18 in·lb (UL/CSA) Recommended Screw Driver : Pozidriv 2 Degree of Protection : Front IP20 (IEC 60529) Pollution Degree : 3 Mechanical Durability : 20,000 cycles Ampere Rating UL/CSA : 60 A Horsepower Rating UL/CSA : Single Phase: 2 Hp at 110–120 V AC 7.5 Hp at 240 V AC 15 Hp at 440–480 V AC 15 Hp at 550–600 V AC Three Phase: 15 Hp at 220–240 V AC 30 Hp at 440–480 V AC 30 Hp at 550–600 V AC Standards Compliance : IEC 60947-3 UL 508 CSA C22.2 No. 14 Product Certifications : CE, cULus, RoHS (EU Directive 2011/65/EU and Amendment 2015/863), REACH, TSCA Special Features : Compact design for space-saving installation Visible contacts for safety (for 100 A and above, applicable to series) Modular design for faster installation and accessory compatibility Knife contact solution for low power loss and heat Dimensions : Width: 105 mm Height: 91.5 mm Depth/Length: 84.5 mm Weight : 0.6 kg HS Code : 8536.50.80 Country of Origin : Finland

Buy Options

Condition, indicative price, stock, and lead time. Confirm current availability via RFQ.

Specifications

Product Type

Switch-Disconnector (Non-Fusible Disconnect Switch)

Manufacturer

ABB

Model

OT63F6 (Product ID: 1SCA105379R1001)

Device Application

Isolation, manual switching, and disconnection in low-voltage circuits (e.g., power distribution, motor control centers)

Poles Description

6P (6 poles)

Rated Operational Current AC-21A (Ie)

63 A at 380–415 V

Rated Operational Current AC-22A (Ie)

63 A at 380–415 V

Rated Operational Current AC-23A (Ie)

63 A at 380–415 V

Rated Operational Power AC-23A (Pe)

11 kW at 220–240 V

Conventional Free-air Thermal Current (Ith)

63 A at 40 °C

Conventional Thermal Current (Ithe)

63 A (fully enclosed)

Rated Operational Voltage

750 V AC (main circuit)

Maximum Operating Voltage UL/CSA

600 V AC

Rated Insulation Voltage (Ui)

750 V (IEC/EN 60664-1)

Rated Impulse Withstand Voltage (Uimp)

8 kV

Rated Conditional Short-Circuit Current (Inc)

50 kA with 100 A fuse at ≤415 V

Rated Short-Circuit Making Capacity (Icm)

1.4 kA at 690 V

Rated Short-time Withstand Current (Icw)

1.5 kA for 1 s

Power Loss

2.8 W per pole at rated operating conditions

Operating Mode

Front operated

Handle Type

Knob handle (handle and shaft not included)

Mounting Type

Base mounting, DIN-rail mountable

Position of Line Terminals

Top In – Bottom Out or Bottom In – Top Out

Connection Type

Screw terminals with protected clamp

Cable Cross-Section

Flexible with Ferrule: 1 x 1.5–4 mm²

Solid

1 x 1.5–6 mm²

Flexible

1 x 1.5–35 mm²

Stranded

1 x 1.5–35 mm²

Wire Stripping Length

10–12 mm

Tightening Torque

2 N·m (IEC 60947-1); 18 in·lb (UL/CSA)

Recommended Screw Driver

Pozidriv 2

Degree of Protection

Front IP20 (IEC 60529)

Pollution Degree

3

Mechanical Durability

20,000 cycles

Ampere Rating UL/CSA

60 A

Horsepower Rating UL/CSA

Single Phase: 2 Hp at 110–120 V AC

Three Phase

15 Hp at 220–240 V AC

Standards Compliance

IEC 60947-3

Product Certifications

CE, cULus, RoHS (EU Directive 2011/65/EU and Amendment 2015/863), REACH, TSCA

Special Features

Compact design for space-saving installation

Dimensions

Width: 105 mm

Height

91.5 mm

Depth/Length

84.5 mm

Weight

0.6 kg

HS Code

8536.50.80

Country of Origin

Finland

Type

100 kA with 100 A fuse at 500 V

Series

UL 508

FAQ