Control Techniques MultiAx SAC STDP05 3-Axis Servo Drive

Control Techniques

Details updated 10/20/2026

Product Description

Control Techniques MultiAx SAC STDP05 three-axis servo drive with AXIS A, AXIS B and AXIS C connections. The photographed nameplate specifies a three-phase 380–480 V AC input at 50/60 Hz, 15.6 A RMS rated input current and 9.75 kW input-side rated power. Each axis is marked 9.375 A RMS and 4.875 kW rated output, with a 0–500 Hz output frequency range. Input-side power and per-axis output power are separate nameplate ratings and should not be added together. The three supplied photographs show the actual equipment, its identification label and terminal connections. STDP05 is preserved as the printed nameplate code; the photographed unit separately lists S/W Rev 07.02.11. Visible exterior wear can be assessed in the photographs. Operational testing, current supply, included accessories and delivery details are confirmed with the quotation.

Specifications

Category: Drives and Inverters
Subcategory: Servo and Motion Control
Manufacturer: Control TechniquesSource
Product family: MultiAxSource
Drive marking: SACSource
Nameplate code: STDP05Source
Axis connections: AXIS A, AXIS B and AXIS CSource
Input voltage: 3-phase, 380–480 V AC, ±10%Source
Input frequency: 50/60 Hz, ±5%Source
Rated input current: 15.6 A RMSSource
Input-side rated power: 9.75 kWSource
Axis output voltage: 3-phase, 0 to input voltageSource
Axis output frequency: 0–500 HzSource
Rated output current per axis: 9.375 A RMSSource
Rated output power per axis: 4.875 kWSource
Input overload rating: 200% for 2 secondsSource
Axis output overload rating: 200% for 2 secondsSource
Photographed unit software revision: 07.02.11Source

Before ordering MultiAx SAC STDP05

Match the complete MultiAx SAC STDP05 identification, the required motor and feedback interfaces, and your existing machine configuration before ordering.
The 9.375 A RMS and 4.875 kW output ratings apply to each axis; 9.75 kW is the input-side rating shown on this unit.
The photographed unit lists S/W Rev 07.02.11. Confirm the software revision and any required machine parameters for the offered unit.
Request the required power-on, axis-load and feedback tests. The photographs alone do not establish functional test results.
Confirm the exact delivery contents. The separate silver Control Techniques interface assembly visible beside the drive, cables, connectors, software and manuals are not assumed to be included.

Condition requirements: Used. Select your preferred condition in the quote form; current supply is confirmed separately. Condition guide

Current supply: Confirm on quote
Offered condition: Specify your requirement
Hardware / firmware: Confirm the offered unit on quote
Testing: Include your testing requirements in the RFQ
Lead time: Confirm with quantity and destination

Technical references

These references support the product specifications. Check the label and required series when selecting a replacement.

User-supplied Control Techniques nameplate photograph — MultiAx SAC STDP05
Second original photograph: MultiAx SAC / STDP05 identification label, input and axis output rating table, S/W Rev field; AXIS A/B/C labels also visible in third photograph. · Checked 2026-10-20
Specifications apply to the photographed unit. STDP05 is retained as printed; its code meaning is not inferred. Software revision is a separate label field. Availability and operational condition are confirmed on quote.
Nidec / Control Techniques — MultiAx SAC STDP05
Official MultiAx product and documentation entry. Unit-specific ratings are taken from the supplied nameplate rather than extrapolated from the product family. · Checked 2026-10-20
Family-level reference; does not decode the STDP05 nameplate code.

Before we quote this part

Actual photos when available

Nameplate, condition, and visible wear can be shared before quote when stock photos are not enough.

Test notes for used units

Power-on or function test status is stated when available, with clear condition grading.

Trackable global shipping

DHL, FedEx, UPS, or forwarder options can be quoted with packing photos and tracking details.

Clear DOA boundary

For tested units, quote terms can include 7-day DOA support unless otherwise stated.

Independent sourcing disclaimer

We are not an authorized distributor, reseller, or representative of Siemens, Mitsubishi, Omron, or other manufacturers listed on this site. All product names, trademarks, brands, and logos are the property of their respective owners. Products may be used, refurbished, surplus, or sourced from the secondary market unless otherwise stated.

Need MultiAx SAC STDP05 availability?

Prices and stock can change. Submit quantity, required condition, and destination for a current quote.

Request Quote

FAQ

How do I confirm availability for MultiAx SAC STDP05?

Send the complete part number, required quantity, condition and any hardware or firmware requirement. We check current supply and confirm the offered unit and lead time on your quote.

How do I buy MultiAx SAC STDP05?

Submit a Request for Quote on this page with quantity, required condition, and ship-to country. We respond by email with pricing and delivery options.

What condition options are available for MultiAx SAC STDP05?

You can request Used for MultiAx SAC STDP05. We confirm the offered condition and current supply on your quote. See our condition guide at https://www.usedautomations.com/condition-codes.