Expansion Receiver Module, non‑isolated, VersaMax series

Product Description

The IC200ERM002 is a non-isolated expansion receiver module for GE Fanuc VersaMax systems, used to extend PLC or I/O station capacity by supporting up to seven groups with as many as eight modules per group. It integrates with single-ended or multi-rack VersaMax expansion architectures and includes an installed power supply to feed connected modules. Two 26-pin female D-shell ports provide inbound expansion connectivity and daisy-chain/terminator linkage. Status is indicated via three onboard LEDs. For multi-rack implementations, the maximum expansion cable length is 15 m (approximately 50 ft); for single-ended configurations, the limit is 1 m (approximately 3.3 ft). Supported data transfer rates are 5 Mbps or 2.765 Mbps depending on setup. The module offers selectable backplane voltages of 5 V or 3.3 V with corresponding current consumption of 70 mA and 20 mA. Nominal module dimensions are 2.63 in (66.8 mm) wide and 5.04 in (128 mm) tall, excluding any attached power supply hardware.

Key Features

• •Non‑isolated VersaMax expansion receiver module
• •Supports 7 groups, up to 8 modules each
• •Single‑ended or multi‑rack expansion architectures
• •Two 26‑pin female D‑shell expansion ports
• •Three LED status indicators
• •Data rates selectable at 5 Mbps or 2.765 Mbps
• •Backplane 5 V or 3.3 V, 70 mA/20 mA

Specifications

Manufacturer Part Number

IC200ERM002

Product Type

Expansion Receiver Module, non‑isolated

Series / Product Line

VersaMax

Expansion Architecture

Single‑ended or multi‑rack

Max cable length (multi‑rack)

15 m (50 ft)

Max cable length (single‑ended)

1 m (3.3 ft)

Data transfer rate

5 Mbps or 2.765 Mbps

Ports

Two 26‑pin female D‑shell

LED Indicators

3 status LEDs

Backplane voltage options

5 V or 3.3 V

Current consumption

70 mA (5 V) / 20 mA (3.3 V)

Module width

2.63 in (66.8 mm)

Module height

5.04 in (128 mm)

GTIN-13

0888165908559

FAQ